Product Description
This compact handheld cable verifier features a USB rechargeable lithium ion battery for easy recharge on the go. It verifies the length and integrity of coaxial and UTP data/telephone cabling. It’s wiremap system detects short circuits, split pairs and cable length up to 350m. The remote probe can also be used to trace cables in patch racks by injecting an audible signal down the line. Patch leads & field wiring may be plugged inline between the units to provide instant verification of continuity and wiring sequence. Suits RJ45 and RJ11 leads. Probe requires 9V battery.FeaturesCable length measurement, accurate to ±3%Short circuit, open, split pair detectionUTP cable conductor verificationIncludes USB charging leadInternal lithium ion battery in main unitBright display backlightingAuto power offConfirms integrity of patch leads and field wiringSuits RJ11 and RJ45 cablingAdjustable buzzer volume
Description: -
Customers Who Viewed This Item Also Viewed
Related products
Combination DMM & LAN Cable Tester
Includes all the features of a standard digital multimeter with the addition of a LAN tester. This is the perfect ‘all-in-one’ solution for network installers & IT technicians. The multimeter is an auto ranging design measuring current, voltage & resistance. Includes a max reading recall function, plus data hold. The LAN tester features dual RJ45 sockets on top for quick testing of ethernet patch leads. A remote terminator permits testing of installed cables in buildings & patch panels. The LAN tester quickly confirms the integrity of each conductor by way of the LED indicators. Suitable for both RJ45/RJ11 & BNC coaxial cabling (adaptor leads included). Supplied with rubber holster, carry case, networkadaptors and high quality silicon rubber test probes.FeaturesAutoranging multimeterWill test 10Base-T, 10Base-2, RJ45/11, 258A, TIA 568A/568B and Token RingIncludes RJ & BNC network lead adaptorsAuto power offSupplied with test probe leads & carry caseBattery includedCat II 1000V & Cat III 600V
Sound Pressure Level dB Meter
A must for the serious audio installer or enthusiast. This quality sound pressure level meter gives a digital readout of the ambient noise level at its microphone. Features two ranges: Low (30 to 80dB) and High (80 to 130dB), with two built-in weighting curves. A and C weighting. Response can be switched between slow (1s) or fast (125ms). Features a max hold switch, which displays the highest reading attained. Supplied with protective carry case, tripod mounting adaptor and mic wind screen. Requires 1 x 9V long life battery (included).
Cable Tester For Networks With Port Flash
Next time you need to check your cables to ensure you will never again have a faulty cable on your network. Instantly displays the status of all cable conductors (shorted pins, straight or crossover cable identification). Makes it easy to troubleshoot connections. Suits most common network configurations.WARNING!THIS DEVICE IS NOT SUITABLE FOR TESTING LIVE DATA CABLES!FeaturesSmall size, easy to carry.Multi-function, simple operationLED status displayVerifies RJ45 RJ11 cablesChecks wire map of continuity, open, short and crossPort flash function for locating cables by flashing on a SwitchThree testing modes to adjust the testing speed: Automatically fast scan, Automatically slow scan and Manual testLamp light assists use in dark corners
Pocket Sound Pressure Level dB Meter
Compact pocket sized SPL meter for general purpose sound level measurement. The wide 40 to 130dB range is ideal for occupational health and safety testing in venues, industrial environments, car audio and home theatres. Fast response time with min/max function. LCD backlight switches on automatically when working in dark areas. Includes threaded insert on rear for tripod mounting. Auto power off.Ranges: 40-130dBResolution: ±0.1dBFreq. range: 31.5Hz – 8000HzFreq. weighting: AAccuracy: ±3.5dBMicrophone: Electret condenserBattery: 9V (included)Dimensions: 130H x 52W x 32D mm
Product Description
This compact handheld cable verifier features a USB rechargeable lithium ion battery for easy recharge on the go. It verifies the length and integrity of coaxial and UTP data/telephone cabling. It’s wiremap system detects short circuits, split pairs and cable length up to 350m. The remote probe can also be used to trace cables in patch racks by injecting an audible signal down the line. Patch leads & field wiring may be plugged inline between the units to provide instant verification of continuity and wiring sequence. Suits RJ45 and RJ11 leads. Probe requires 9V battery.FeaturesCable length measurement, accurate to ±3%Short circuit, open, split pair detectionUTP cable conductor verificationIncludes USB charging leadInternal lithium ion battery in main unitBright display backlightingAuto power offConfirms integrity of patch leads and field wiringSuits RJ11 and RJ45 cablingAdjustable buzzer volume