Hdmi over dual-cat6 extender system 1080p ddc – cypress

Product Description

This HDMI to CAT6 transmitter (Tx) and receiver (Rx) kit can extend HDMI digital signal through CAT-6 cables. This is compatible to HDMI v1.3 specifications, supports up to 15 metres transfer of Deep Colour 12 bit video and up to 45M in 8 bit colour. Supports lossless compressed (Dolby® TrueHD, Dolby® Digital Plus and DTS-HD Master Audio) Digital audio, with a bandwidth up to 225MHz. Easy to install. Supports video resolution at up to 1080p. Power is inserted at the transmitter then to all receivers are PoC compatible.

Compatible Dual CAT6 Splitters: CLUX-1H4CAT and CLUX-1H8CAT
Compatible Matrix Switches: CMLUX-4H4CAT and CMSI-8H8HC

Transmitters are available with either external power-pack, or are powered by the HDMI signal. PoC (Power Over Cable).

Compliant with HDMI 1.3, HDCP 1.1 and DVI1.1 standards, CEC bypass
Supports digital video formats in Deep Color Mode at up to 36 bits (12bits/color)
Supports lossless compressed (Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio) Digital audio
Requires two CAT-6 cables for AV data & DDC return
TMDS data rebuild before re-transmitting them with optimal quality regardless of the incoming signal quality
1080p/8bits resolution can run up to 45 meters
1080p/12bits resolution can run up to 15 meters

Description: -

Description:  HDMI over Dual CAT6/7 Receiver

Ethernet:  -

4K:  -

Max Res.:  1080p

Output:  1x HDMI

Cable Length:  45M @ 8-bit, 15M @ 12-bit

Input:  Dual CAT6

Cable:  Dual CAT6/7

Compliance:  HDMI V1.3

IR:  No

Power:  PoC

Interface:  Receiver

3D:  Yes

HDCP:  Yes

HD Audio:  Yes

Deep Colour:  Yes