Product Description
This is a vertical, double height version of the popular Neo3.0 Ribbon. Utilising the same special aluminium in a double height optioned package. Super-strong Neodymium offers extra efficiency and linear field density. Reinforced sandwich diaphragm reduces resonance & improves power. Low distortion factor, good power-handling capabilities, flat impedance. High linear impedance and amplitude response over a very broad range. Attractive silver rough-finish aluminium face plate with rubber grommet. Quality polycarbonate package with low stray flux for close to TV use. Minimum crossover frequency is at least 2.5KHz 3nd Order (-18dB) Higher crossover frequency will give higher system total power handling and/or will allow gentler slope (but must be at least -24dB @ 1.4KHz). Ribbon diaphragm 34mg, (960mm²) 8mm X 120mm X 0.02mm Super strong 0.6 Tesla Neodymium magnet Impedance 7 Ohm, DC 0.02 ohm [Beware!]
Sensitivity 98dB
1.4KHz to 40KHz and above
Resonance frequency 300Hz
Power 20W Normal, 60W Max
Fascia 85x165mm Silver or Black
5” (120mm) Ribbon Tweeter pair:
SOLD IN MATCHED PAIRS
Requires 18dB crossover
Super strong Neodymium magnet fro high efficiency
Build-in impedance conversion transformer
Effective from 1,200Hz upwards due to the large diaphragm area and low self-resonance.
Thin enforced sandwich ribbon diaphragm
Low distortion factor, good power-handling capabilities, high linear impedance and amplitude frequency response and the broad frequency response range.
Flat impedance from 1,000 to 40,000Hz
Ribbon material Enforced sandwich
Ribbon mass 34mg
Ribbon dimension 8mmX120mmX0.02mm
Ribbon area 960square millimeters
Gap flux 0.6 Tesla
Gap height 3mm
Impedance 7 Ohm
DCR 0.02 ohm
Sensitivity 98dB/M/W
Frequency response 1,200~40,000Hz
Resonance frequency 300Hz
Power handling 20W Normal, 50W Max
Recommended crossover frequency 2,000Hz / 2nd-Order
Description: -
Customers Who Viewed This Item Also Viewed
Related products
Product Description
This is a vertical, double height version of the popular Neo3.0 Ribbon. Utilising the same special aluminium in a double height optioned package. Super-strong Neodymium offers extra efficiency and linear field density. Reinforced sandwich diaphragm reduces resonance & improves power. Low distortion factor, good power-handling capabilities, flat impedance. High linear impedance and amplitude response over a very broad range. Attractive silver rough-finish aluminium face plate with rubber grommet. Quality polycarbonate package with low stray flux for close to TV use. Minimum crossover frequency is at least 2.5KHz 3nd Order (-18dB) Higher crossover frequency will give higher system total power handling and/or will allow gentler slope (but must be at least -24dB @ 1.4KHz). Ribbon diaphragm 34mg, (960mm²) 8mm X 120mm X 0.02mm Super strong 0.6 Tesla Neodymium magnet Impedance 7 Ohm, DC 0.02 ohm [Beware!]
Sensitivity 98dB
1.4KHz to 40KHz and above
Resonance frequency 300Hz
Power 20W Normal, 60W Max
Fascia 85x165mm Silver or Black
5” (120mm) Ribbon Tweeter pair:
SOLD IN MATCHED PAIRS
Requires 18dB crossover
Super strong Neodymium magnet fro high efficiency
Build-in impedance conversion transformer
Effective from 1,200Hz upwards due to the large diaphragm area and low self-resonance.
Thin enforced sandwich ribbon diaphragm
Low distortion factor, good power-handling capabilities, high linear impedance and amplitude frequency response and the broad frequency response range.
Flat impedance from 1,000 to 40,000Hz
Ribbon material Enforced sandwich
Ribbon mass 34mg
Ribbon dimension 8mmX120mmX0.02mm
Ribbon area 960square millimeters
Gap flux 0.6 Tesla
Gap height 3mm
Impedance 7 Ohm
DCR 0.02 ohm
Sensitivity 98dB/M/W
Frequency response 1,200~40,000Hz
Resonance frequency 300Hz
Power handling 20W Normal, 50W Max
Recommended crossover frequency 2,000Hz / 2nd-Order