Self resetting. Breaks at 100°C. 10 amps 250V AC. Mounting hole centres 23.5mm. Contact surface Ø 16mm. Normally Closed Contact, Auto Reset.UL / SA Approved.

Self resetting. Closes at 100°C. 10 amps 250V AC. Mounting hole centres 23.5mm. Contact surface Ø 16mm. Normally Open Contact, Auto Reset.UL / SA Approved.

Single pole stud type 10A DC circuit breaker with surface mounting tabs. Ideal for use in vehicles. Auto reset. Current ratings at 12V/24V DC. Meets SAE J553 standard. #10 – 32 UNF stud connection. Includes hardware.Dimension Drawing:Trip Time vs % of Rated Current

A resettable blade fuse style 10A circuit breaker suitable for 12V or 24V DC power systems. Suits most automotive blade fuse holders. A drop in replacement for automative blade fuses. Max voltage 28V DC. Resettable, 5mm blades.Note: Due to the added height, these fuse/breakers are not suitable for use in some covered fuse blocks (such as Altronics S 6024 or S 6026)Dimensions:Trip Time vs % of Rated Current

This 10A panel mount push button single pole circuit breaker uses a snap acting bimetal element to sense current overload. As the bimetal snaps through in response to an overload, it opens the electrical contacts and allows the reset button to pop out. The circuit remains disconnected until someone pushes the reset button, closing the contacts and re-energizing the circuit. Designed for protection of industrial circuitry up to 250V AC or 50V DC voltages. Requires a 12mm mounting hole.18mm label plate.FeaturesUL, CSA, VDE approvedRoHS approvedRating at 250V AC or 50V DCBlack plastic actuator buttonSupplied with all mounting hardwareQuick connect 6.3mm terminalsIncludes ID plateTrip Time Information100% – No trip165% – Trip in 1hr.200% – 4 to 30s300% – 2.5 to 11s400% – 1.6 to 7s500% – 0.8 to 2.5s600% – 0.6 to 1.7s