Compare
Sold By : Quickshop SKU: KIT360MDF Categories: , ,

Product Description

Includes cabinets, all drivers, all hardware & assembled crossovers. Traditional design 2-Way utilising the superb JP3.0 bandwidth matched with Peerless “Exclusive Range” of audiophile drivers. Complete Kits supplied in pairs for premium HiFi Stereo systems.

Sold in stereo pairs

“…These unique speakers are among the very best kit speakers that money can buy. Two separate stereo pairs of loudspeakers are presented, KIT260 & KIT360. In addition, a centre channel variant of the KIT260, the 260C was designed to complement the KIT260 and KIT360 for high-end Home Theatre A/V systems or for a high performance stereo system. Alternatively, you may decide on a mix of the HD260 (front) and HD360 (rear) together with the HD260C for the centre front channel. Whichever approach you take, you can be sure that you will be getting a sensational speaker system. Make no mistake, these ribbon units are the finest tweeters we have ever heard. They are so clean in their definition and the pin-point localisation of instruments in a stereo spread has to be heard to be believed. On top of that, these speakers have very low distortion – measured at around 0.3% THD at 1kHz and 1 watt…” Leo Simpson. Silicon Chip. December 2007
www.siliconchip.com.au

Fundamental physics support the ribbon as a perfect type of transducer. A thin light metal ribbon is suspended in a powerful magnetic field. The signal current passes through the ribbon in the magnetic field. The ribbon itself projects the sound faithfully and instantaneously. The ribbon serves both as voice coil and diaphragm. Every part of the ribbon is driven directly and simultaneously without any energy storage. No sound colouring at all in its usable frequency range up to 100KHz. Output voice therefore always perfectly replicates the input signal Maximum speed of response. Start and stop is instantaneous Maintains the leading edge of musical sounds and their harmonics Extremely low inter-modulation and harmonic distortion due to low mass Capable of the highest efficiency known in direct radiator transducers.
www.fountek.com.au

SPECIFICATIONS FOR KIT360
Frequency Range 43Hz-40kHz (On Axis)
Efficiency (Averaged) 87.5dB SPL (1M/2.83Vrms)
Nominal Impedance 8 Ohms (6.1 ohms Rdc)
Recommended power 5 to 120W Unclipped program material
Harmonic Distortion THD 0.3% @ 1 Watt (2.83Vrms) 1kHz
Relative Phase Coherence ±30° 400Hz to 10kHz
Crossover Network No Soldering required. Fully finished. Ready to go.
Internal Wiring High Quality OFC 384 Strand Low-Capacitance
Quick-Install Push-On connections
Speaker terminals 4mm Dual gold plated binding posts (x4)
For single or Bi-Wire/amplifier connections
Crossover Filter 2-Way Off-Set Bessel/Butterworth Linear-Phase
Crossover Frequency 3.2kHz
Crossover Low Pass 2nd Order 12dB/Octave Low Pass
Crossover High Pass 3rd Order 18dB/Octave High Pass
Mid-Bass Peerless 830883 Woofer 6.5” Nomex Cone Cast with Centre Phase Plug
Tweeter Fountek JP3.0 Ribbon
Dimensions 445x205x345mm (360mm w/ grill)
Weight 12Kg each.

Description: -

    Description:  6.5" Ribbon Kit Plain MDF

    Slope:  12dB/18dB

    Weight:  12Kg

    QTY:  2

    Size:  205(w)x445(h)x345(d)mm

    Crossover:  3.2KHz 12/18dB/Oct

    Power (RMS):  30Wrms

    Freq.:  43Hz - 40KHz

    Power:  5 to 120W

    Inch:  6.5"

    Impedance (Ohm):  8 ohm

    Woofer:  830883

    Sens.:  87.5dB

    Impedance:  8Ω (6.1Ω Re)

    Colour:  Bare MDF

    Suits:  Bookshelf

    Tweeter:  JP3.0

    Materials:  MDF+Veneer

    Price Type:  Pair

    Manufacturer:  Peerless/Fountek

    Type:  Veneer

    Grille:  Yes

Product Description

Includes cabinets, all drivers, all hardware & assembled crossovers. Traditional design 2-Way utilising the superb JP3.0 bandwidth matched with Peerless “Exclusive Range” of audiophile drivers. Complete Kits supplied in pairs for premium HiFi Stereo systems.

Sold in stereo pairs

“…These unique speakers are among the very best kit speakers that money can buy. Two separate stereo pairs of loudspeakers are presented, KIT260 & KIT360. In addition, a centre channel variant of the KIT260, the 260C was designed to complement the KIT260 and KIT360 for high-end Home Theatre A/V systems or for a high performance stereo system. Alternatively, you may decide on a mix of the HD260 (front) and HD360 (rear) together with the HD260C for the centre front channel. Whichever approach you take, you can be sure that you will be getting a sensational speaker system. Make no mistake, these ribbon units are the finest tweeters we have ever heard. They are so clean in their definition and the pin-point localisation of instruments in a stereo spread has to be heard to be believed. On top of that, these speakers have very low distortion – measured at around 0.3% THD at 1kHz and 1 watt…” Leo Simpson. Silicon Chip. December 2007
www.siliconchip.com.au

Fundamental physics support the ribbon as a perfect type of transducer. A thin light metal ribbon is suspended in a powerful magnetic field. The signal current passes through the ribbon in the magnetic field. The ribbon itself projects the sound faithfully and instantaneously. The ribbon serves both as voice coil and diaphragm. Every part of the ribbon is driven directly and simultaneously without any energy storage. No sound colouring at all in its usable frequency range up to 100KHz. Output voice therefore always perfectly replicates the input signal Maximum speed of response. Start and stop is instantaneous Maintains the leading edge of musical sounds and their harmonics Extremely low inter-modulation and harmonic distortion due to low mass Capable of the highest efficiency known in direct radiator transducers.
www.fountek.com.au

SPECIFICATIONS FOR KIT360
Frequency Range 43Hz-40kHz (On Axis)
Efficiency (Averaged) 87.5dB SPL (1M/2.83Vrms)
Nominal Impedance 8 Ohms (6.1 ohms Rdc)
Recommended power 5 to 120W Unclipped program material
Harmonic Distortion THD 0.3% @ 1 Watt (2.83Vrms) 1kHz
Relative Phase Coherence ±30° 400Hz to 10kHz
Crossover Network No Soldering required. Fully finished. Ready to go.
Internal Wiring High Quality OFC 384 Strand Low-Capacitance
Quick-Install Push-On connections
Speaker terminals 4mm Dual gold plated binding posts (x4)
For single or Bi-Wire/amplifier connections
Crossover Filter 2-Way Off-Set Bessel/Butterworth Linear-Phase
Crossover Frequency 3.2kHz
Crossover Low Pass 2nd Order 12dB/Octave Low Pass
Crossover High Pass 3rd Order 18dB/Octave High Pass
Mid-Bass Peerless 830883 Woofer 6.5” Nomex Cone Cast with Centre Phase Plug
Tweeter Fountek JP3.0 Ribbon
Dimensions 445x205x345mm (360mm w/ grill)
Weight 12Kg each.

Description: -

    Description:  6.5" Ribbon Kit Plain MDF

    Slope:  12dB/18dB

    Weight:  12Kg

    QTY:  2

    Size:  205(w)x445(h)x345(d)mm

    Crossover:  3.2KHz 12/18dB/Oct

    Power (RMS):  30Wrms

    Freq.:  43Hz - 40KHz

    Power:  5 to 120W

    Inch:  6.5"

    Impedance (Ohm):  8 ohm

    Woofer:  830883

    Sens.:  87.5dB

    Impedance:  8Ω (6.1Ω Re)

    Colour:  Bare MDF

    Suits:  Bookshelf

    Tweeter:  JP3.0

    Materials:  MDF+Veneer

    Price Type:  Pair

    Manufacturer:  Peerless/Fountek

    Type:  Veneer

    Grille:  Yes