Designed for use as a Home Theatre Centre Channel Single Unit To match acoustically & aesthetically with the KIT260 Speakers.
Sold in singles
“…These unique speakers are among the very best kit speakers that money can buy. Two separate stereo pairs of loudspeakers are presented, KIT260 & KIT360. In addition, a centre channel variant of the KIT260, the 260C was designed to complement the KIT260 and KIT360 for high-end Home Theatre A/V systems or for a high performance stereo system. Alternatively, you may decide on a mix of the HD260 (front) and HD360 (rear) together with the HD260C for the centre front channel. Whichever approach you take, you can be sure that you will be getting a sensational speaker system. Make no mistake, these ribbon units are the finest tweeters we have ever heard. They are so clean in their definition and the pin-point localisation of instruments in a stereo spread has to be heard to be believed. On top of that, these speakers have very low distortion – measured at around 0.3% THD at 1kHz and 1 watt…” Leo Simpson. Silicon Chip. December 2007
D’Appolito MTM design offers a very high 92.5dB efficiency with pin-point imaging for a beautifully accurate sound stage. Complete Kits supplied with cabinet, drivers, all hardware & assembled crossover.
SPECIFICATIONS FOR KIT260C
Frequency Range 44Hz-40kHz (On Axis)
Efficiency (Averaged) 92.5dB SPL (1M/2.83Vrms)
Nominal Impedance 4 Ohms
Recommended power 5 to 120W Unclipped program material
Harmonic Distortion THD 0.3% @ 1 Watt (2.83Vrms) 1kHz
Relative Phase Coherence ±30° 400Hz to 10kHz
Crossover Network No Soldering required. Finished ready to go.
Internal Wiring High Quality OFC 384 Strand Low-Capacitance
Quick-Install Push-On connections
Speaker terminals 4mm Dual gold plated binding posts (x4)
For single or Bi-Wire/amplifier connections
Crossover Filter 2-Way Off-Set Bessel/Butterworth Linear-Phase
Crossover Frequency 3.8kHz
Crossover Low Pass 2nd Order 12dB/Octave Low Pass
Crossover High Pass 3rd Order 18dB/Octave High Pass
Mid-Bass Peerless 832873 Woofer 5” Nomex Cone
Cast Alloy Frame with inverted dust cap
Tweeter Fountek JP3.0 Ribbon
Dimensions 555x180x365mm (380mm w/ grill)
Weight 15Kg each.