Cel-fi antenna lpda 11dbi – blackhawk

$ 191.35

Compare
Sold By : Quickshop SKU: ANT-BH-YG-LPDA-10 Categories: ,

Product Description

Operating on all 3G and 4G frequencies in Australia and abroad, this high grade antenna can be used in a range of residential, commercial, and industrial mobile broadband applications on any mobile network. This is the ideal external antenna for Cel-Fi repeater systems.

The Blackhawk LPDA Antenna provides an ideal solution for 3G / 4G voice and data applications. With the rollout of new 3G and 4G frequencies such as 700 MHz 4GX and 2600 MHz 4G, traditional Yagi antennas just haven’t been able to keep up. LPDA antennas allow a single antenna to cover all frequencies with the high gain of a Yagi antenna that rural and remote areas demand. This one antenna can be used on any mobile phone network in Australia, in any area without worrying about compatibility. A Log Periodic Dipole Antenna, or LPDA for short, is a clever antenna design that provides exceptionally wideband performance by phasing a series of elements together, much like an ordinary yagi but with each successive element of a smaller (or larger) length. The result of this clever engineering is an antenna that holds high gain, with good tuning, across the entire cellular frequency range.

11 dBi gain across lower bands 698-960 MHz
12 dBi gain across upper bands 1710-2700 MHz
Ruggedised construction for Australian conditions
30 cm tail with pre-terminated N Female connector
Fully welded, powdercoat aluminium design
Stainless steel mounting clamp included
Ideal for high speed 3G and 4G LTE applications.
Ideal for Telstra Next-G and 4GX networks, Optus, and Vodafone 3G/4G.

Frequency Range 698-960 MHz / 1710-2700 MHz
Input Impedance 50 Ω
Peak Gain 11 / 12 dBi
VSWR ≤2.5:1 / ≤1.8:1
Polarisation Vertical, linear
Horizontal Beam-width 55 / 42°
Vertical Beam-width 46 / 34°
Maximum Input Power 50 W
Input Connector N Female
Cable 30 cm cable tail
Lightning Protection DC Ground
Radiator Material Fully welded aluminium, black powder coat
Mounting Stainless Steel, pole mount Ø30-50 mm
Dimensions 1240 x 200 x 60 mm
Packing Dimensions 1290 x 210 x 90 mm
Weight 2.2 kg
Rated Wind Velocity 192 km/h
Operating Temperature -40 to +65°C

Description: -

    Description:  Blackhawk LPDA Antenna 698-2700MHz 14dBi + Cable

    Feature:  10 dBi gain across lower bands 698-960 MHz 11 dBi gain across upper bands 1710-2700 MHz Lightweight, compact design Mounting clamp included 30 cm tail with pre-terminated N Female connector Supplied with 10 m of PT240 cable N Male – SMA Male connectors Great cost effective antenna.

    Lead:  10M PT240

    Gain:  11dBi

    Band:  3G/4G 698-960MHz/1710-2700 MHz

    Length:  450mm

    Frequency:  698-960 MHz / 1710-2700 MHz

    Type:  Antenna LPDA

    OEM:  Blackhawk LPDA 11dBi

    Plug:  SMA/M

    Description Extended:  The Blackhawk wideband antenna is a fantastic little antenna providing good performance with a lightweight, low cost design. There’s plenty of situations where a big, solid metal antenna is necessary, but also plenty where something quick and small can be just as useful. This antenna is great for areas where indoor signal is weak, and only a simple antenna on the roof is enough to give a fantastic improvement.

    Colour:  White

Product Description

Operating on all 3G and 4G frequencies in Australia and abroad, this high grade antenna can be used in a range of residential, commercial, and industrial mobile broadband applications on any mobile network. This is the ideal external antenna for Cel-Fi repeater systems.

The Blackhawk LPDA Antenna provides an ideal solution for 3G / 4G voice and data applications. With the rollout of new 3G and 4G frequencies such as 700 MHz 4GX and 2600 MHz 4G, traditional Yagi antennas just haven’t been able to keep up. LPDA antennas allow a single antenna to cover all frequencies with the high gain of a Yagi antenna that rural and remote areas demand. This one antenna can be used on any mobile phone network in Australia, in any area without worrying about compatibility. A Log Periodic Dipole Antenna, or LPDA for short, is a clever antenna design that provides exceptionally wideband performance by phasing a series of elements together, much like an ordinary yagi but with each successive element of a smaller (or larger) length. The result of this clever engineering is an antenna that holds high gain, with good tuning, across the entire cellular frequency range.

11 dBi gain across lower bands 698-960 MHz
12 dBi gain across upper bands 1710-2700 MHz
Ruggedised construction for Australian conditions
30 cm tail with pre-terminated N Female connector
Fully welded, powdercoat aluminium design
Stainless steel mounting clamp included
Ideal for high speed 3G and 4G LTE applications.
Ideal for Telstra Next-G and 4GX networks, Optus, and Vodafone 3G/4G.

Frequency Range 698-960 MHz / 1710-2700 MHz
Input Impedance 50 Ω
Peak Gain 11 / 12 dBi
VSWR ≤2.5:1 / ≤1.8:1
Polarisation Vertical, linear
Horizontal Beam-width 55 / 42°
Vertical Beam-width 46 / 34°
Maximum Input Power 50 W
Input Connector N Female
Cable 30 cm cable tail
Lightning Protection DC Ground
Radiator Material Fully welded aluminium, black powder coat
Mounting Stainless Steel, pole mount Ø30-50 mm
Dimensions 1240 x 200 x 60 mm
Packing Dimensions 1290 x 210 x 90 mm
Weight 2.2 kg
Rated Wind Velocity 192 km/h
Operating Temperature -40 to +65°C

Description: -

    Description:  Blackhawk LPDA Antenna 698-2700MHz 14dBi + Cable

    Feature:  10 dBi gain across lower bands 698-960 MHz 11 dBi gain across upper bands 1710-2700 MHz Lightweight, compact design Mounting clamp included 30 cm tail with pre-terminated N Female connector Supplied with 10 m of PT240 cable N Male – SMA Male connectors Great cost effective antenna.

    Lead:  10M PT240

    Gain:  11dBi

    Band:  3G/4G 698-960MHz/1710-2700 MHz

    Length:  450mm

    Frequency:  698-960 MHz / 1710-2700 MHz

    Type:  Antenna LPDA

    OEM:  Blackhawk LPDA 11dBi

    Plug:  SMA/M

    Description Extended:  The Blackhawk wideband antenna is a fantastic little antenna providing good performance with a lightweight, low cost design. There’s plenty of situations where a big, solid metal antenna is necessary, but also plenty where something quick and small can be just as useful. This antenna is great for areas where indoor signal is weak, and only a simple antenna on the roof is enough to give a fantastic improvement.

    Colour:  White