Compare
Sold By : Quickshop SKU: HDSK250-BV Categories: , ,

Product Description

The Peerless HDSK250 high-definition loud speaker system is designed to reproduce both music & home theatre audio in true audiophile quality. This attractive and relatively compact sized speaker system gives excellent and enjoyable long-term listening. The powerfully dynamic 5” HDS phase-plug Peerless driver supplies articulate, tight, fast bass with ultra-low distortion and minimal harmonics up to surprisingly high volume levels! The crystal clarity of a beautifully detailed wide sound stage is improved over a majority of other speaker systems due to both the coaxial speaker alignment and the tweeter being counter-sunk into the cabinet which achieves mechanical acoustic time alignment for a brilliantly accurate reproduction with pinpoint sound imaging. Combined with a crossover developed with particular attention being paid to the phase alignment achieves a uniquely seamless transition between the tweeter and mid-woofer not usually mastered by traditional systems. This makes the HDSK250 ideal in home theatre due to the impressive impact of the forward realism achieved and can be placed in any or all of the room positions (front/rear/centre) due to the inherent wide dispersion. The incredible accuracy achieved places this speaker in a “Monitor” class faithfully reproducing even the most subtle details of your favourite music. Multiple driver configurations are also more efficient so are also quite suitable for the low power of valve amplifiers, etc. Ideally matched with our HDSK1000 or HDSK800 subwoofers for an exceptional high-end audio system. A special version of the HDSK250 has been optimised specifically as a horizontally mounted centre channel unit, see our HDSK255c.

Sold in stereo pairs

Frequency Response 47Hz to 25KHz
Size H495 x W180 x D305mm 15Kg
Recommended amplifier 10W to 150Wrms
Impedance 4 ohm Nominal
Sensitivity 92dB
New mains for HiFi Systems
Surround sound for Large rooms
Matches with our subwoofers
See our HDSK800 or HDSK1000
Big sound for a small enclosure
Time-corrected, Pin-Point imaging
Premium MDF cabinet built in Australia
36mm facia thickness beveled edge
Front grill cloth on bevel wooden frame
Bevel anti-diffraction front and back
Internal Bracing to reduce resinances
All internal surfaces are carpeted
Port is bevel edged minimize turbulence

Cabinet Assembled Complete. All holes pre-drilled.
Wadding material pre-attached to inside panels.
Speaker Grill. Assembled with cloth attached.
Printed Circuit Board. Fully assembled with all components & wiring to terminals & back-plate.
Speaker. Mid-Bass Woofer 5″ Peerless 831882 (2x2pcs)
Speaker. Tweeter Dome 1″ Peerless 810921 (2x1pcs)
Set of Screws for attaching drivers and terminal socket. (2x20pcs)
Velcro Strips for affixing the Circuit Board to the inside of the cabinet.

Description: -

    Description:  5" MTM Speaker Kit Black Pair

    Weight:  15Kg

    Size:  180(w)x495(h)x305(d)mm

    QTY:  2

    Crossover:  3.3KHz 12/18dB/Oct

    Impedance (Ohm):  4 ohm

    Freq.:  47Hz - 25KHz

    Impedance:  4Ω (3.6Ω Re)

    Power:  5 to 150W

    Inch:  5"

    Power (RMS):  60Wrms

    Tweeter:  810921

    Woofer:  831882

    Sens.:  91.5dB

    Colour:  Black

    Materials:  MDF+Vinyl

    Price Type:  Pair

    Manufacturer:  Peerless

    Suits:  Speaker Stand

    Type:  Vinyl

    Grille:  Yes

Product Description

The Peerless HDSK250 high-definition loud speaker system is designed to reproduce both music & home theatre audio in true audiophile quality. This attractive and relatively compact sized speaker system gives excellent and enjoyable long-term listening. The powerfully dynamic 5” HDS phase-plug Peerless driver supplies articulate, tight, fast bass with ultra-low distortion and minimal harmonics up to surprisingly high volume levels! The crystal clarity of a beautifully detailed wide sound stage is improved over a majority of other speaker systems due to both the coaxial speaker alignment and the tweeter being counter-sunk into the cabinet which achieves mechanical acoustic time alignment for a brilliantly accurate reproduction with pinpoint sound imaging. Combined with a crossover developed with particular attention being paid to the phase alignment achieves a uniquely seamless transition between the tweeter and mid-woofer not usually mastered by traditional systems. This makes the HDSK250 ideal in home theatre due to the impressive impact of the forward realism achieved and can be placed in any or all of the room positions (front/rear/centre) due to the inherent wide dispersion. The incredible accuracy achieved places this speaker in a “Monitor” class faithfully reproducing even the most subtle details of your favourite music. Multiple driver configurations are also more efficient so are also quite suitable for the low power of valve amplifiers, etc. Ideally matched with our HDSK1000 or HDSK800 subwoofers for an exceptional high-end audio system. A special version of the HDSK250 has been optimised specifically as a horizontally mounted centre channel unit, see our HDSK255c.

Sold in stereo pairs

Frequency Response 47Hz to 25KHz
Size H495 x W180 x D305mm 15Kg
Recommended amplifier 10W to 150Wrms
Impedance 4 ohm Nominal
Sensitivity 92dB
New mains for HiFi Systems
Surround sound for Large rooms
Matches with our subwoofers
See our HDSK800 or HDSK1000
Big sound for a small enclosure
Time-corrected, Pin-Point imaging
Premium MDF cabinet built in Australia
36mm facia thickness beveled edge
Front grill cloth on bevel wooden frame
Bevel anti-diffraction front and back
Internal Bracing to reduce resinances
All internal surfaces are carpeted
Port is bevel edged minimize turbulence

Cabinet Assembled Complete. All holes pre-drilled.
Wadding material pre-attached to inside panels.
Speaker Grill. Assembled with cloth attached.
Printed Circuit Board. Fully assembled with all components & wiring to terminals & back-plate.
Speaker. Mid-Bass Woofer 5″ Peerless 831882 (2x2pcs)
Speaker. Tweeter Dome 1″ Peerless 810921 (2x1pcs)
Set of Screws for attaching drivers and terminal socket. (2x20pcs)
Velcro Strips for affixing the Circuit Board to the inside of the cabinet.

Description: -

    Description:  5" MTM Speaker Kit Black Pair

    Weight:  15Kg

    Size:  180(w)x495(h)x305(d)mm

    QTY:  2

    Crossover:  3.3KHz 12/18dB/Oct

    Impedance (Ohm):  4 ohm

    Freq.:  47Hz - 25KHz

    Impedance:  4Ω (3.6Ω Re)

    Power:  5 to 150W

    Inch:  5"

    Power (RMS):  60Wrms

    Tweeter:  810921

    Woofer:  831882

    Sens.:  91.5dB

    Colour:  Black

    Materials:  MDF+Vinyl

    Price Type:  Pair

    Manufacturer:  Peerless

    Suits:  Speaker Stand

    Type:  Vinyl

    Grille:  Yes