The Peerless HDSK255C audiophile high definition centre speaker is optimised to be mounted horizontally for front and centre positioning. Although the Mid-Bass drivers are NOT magnetically shielded, this will not effect LCD & Plasma screens. Crystal clear highs, tight fast bass, with a beautifully articulated forward mid-range presence with low distortion and low compression gives incredible impact in sound and transports the realism right into your living room! This exceptional speaker is electronically optimised for the horizontal axis with particular attention paid in development to achieve the best vocals for most natural realism possible. When matched with other HDS speakers in a home theatre setup, gives a new level of pinpoint focus imaging to sound effects and their location relative to the screen just as the director intended. The Peerless HDSK250c can be matched with the Peerless HDSK150 satellites, HDSK250 sister speakers or the floor standing HDS455. Also recommended is the XLS1000 or XLS800 subwoofers to complete your ultimate home theatre experience.
Sold in singles for centre channel horizontal mounting
Frequency Response 47Hz to 25KHz
Size H495 x W180 x D305mm 15Kg
Recommended amplifier 10W to 150Wrms
Impedance 4 ohm Nominal
New mains for HiFi Systems
Surround sound for Large rooms
Matches with our subwoofers
See our HDSK800 or HDSK1000
Big sound from a small enclosure
Time-corrected, Pin-Point imaging
Premium MDF cabinet built in Australia
36mm facia thickness beveled edge
Front grill cloth on bevel wooden frame
Bevel anti-diffraction front and back
Internal Bracing to reduce resinances
All internal surfaces are carpeted
Port is bevel edged minimize turbulence
Cabinet Assembled Complete. All holes pre-drilled.
Wadding material pre-attached to inside panels.
Speaker Grill. Assembled with cloth attached.
Printed Circuit Board. Fully assembled with all components & wiring to terminals & back-plate.
Speaker. Mid-Bass Woofer 5″ Peerless 831882 (2pcs)
Speaker. Tweeter Dome 1″ Peerless 810921 (1pcs)
Set of Screws for attaching drivers and terminal socket. (20pcs)
Velcro Strips for affixing the Circuit Board to the inside of the cabinet.