This 4K HDMI over HDBaseT extension system includes a transmitter and receiver (sold seperately) and is a great solution for extending UHD video and audio as well as Ethernet and control via a single run of Cat.5e/6/7 cable over distances up to 35 meters for 4K UHD.
Complies with the advanced HDCP 2.2 and HDMI 2.0 standards, as well as supporting the legacy HDCP 1.x and HDMI 1.x standards.
The use of AVLC (Adaptive Visually Lossless Compression) technology overcomes the limitation of HDBaseT which only has a bandwidth of 10.2Gbps. This extender system let you transmit high quality HDMI video sources, up to and including 4K@60Hz (4:4:4, 8-bit) as well as 10/12-bit sources with HDR. Multiple data and control interfaces are also provided, including IR and RS-232 connections. The Receiver (PD) is powered by 48V Power over HDBaseT (PoH) provided by the Transmitter (PSE), allowing for greater flexibility within different installation scenarios.
Note: The 48V PoH function is designed for powering compatible Receiver units only. Non-PoH Receivers will need their own power supply. Receivers from other brands may not be compatible
HDMI with HDR, 3D & 4K@60Hz support, DVI 1.0 compatible
HDCP 2.2 and HDCP 1.x compliant
Supports up to 4K UHD (18Gbps, 4K@50/60Hz 4:4:4, 8-bit) video input
Supports output resolutions up to 4K@50/60Hz (4:4:4, 8-bit)
Supports Deep Color input and output up to 12-bit
Supports 10-bit and 12-bit HDR bypass
Supports CEC bypass
Simultaneous transmission of video, audio and data over a single Cat.5e/6/7 cable up to 70m at 1080p and 35m at 4K
Supported HDBaseT feature set: HD Video & Audio, 48V PoH, and Control (Bi-directional IR/RS-232 pass-through)
Integrated AVLC (Adaptive Visually Lossless Compression) activates when the bandwidth requirements of the source are beyond 10.2Gbps (340MHz) allowing for support of sources up to 18Gbps (600MHz) with no loss of visual quality
The AVLC function allows manual selection between High Quality (Full bandwidth) mode and Standard mode (Lower bandwidth, useful for longer cable runs with 4K sources)
Supports standard IEEE 802.3 AT 48V PoH from Transmitter (PSE) to Receiver (PD) (compatible Receivers only)