200w bass-shaker bridgeable stereo amplifier with remote

$ 568.66

Compare
Sold By : Quickshop SKU: BSA-200 Categories: , ,

Product Description

Dayton Audio high power low-pass amplifier is designed to power Dayton’s range of tactile transducers and works equally as well as a dedicated subwoofer speaker amplifier. The frequency (20-200Hz) and balance knobs let you dial in the desired crossover point and output. Convenient wired remote volume & power control. Rated at 110Wrms per channel 2 ohm stable. In bridged mono mode, both amplifier channels are combined for high-power 230Wrms mono. Manual and automatic on/off modes allow easy integration into automated systems and saves power when not in use. 5V USB power output is designed for use with the Dayton Audio Wave-Link wireless system (sold separately, see WLS). Gold plated 4mm or bare wire speaker binding terminals. Compact 60x240x210mm. Includes brackets for vertical or horizontal mounting.

Powerful 200 watt amplifier optimised for bass shaker installations
Robust 2 ohm minimum impedance provides maximum output to bass shakers
RCA line in and out for daisy chaining multiple units
Adjustable 50-200 Hz low pass crossover for seamless audio integration
Built-in USB port for powering 5V devices or for use with the wireless Dayton Audio Wave-Link receiver (Optional, see WLS)
Included wired remote provides a convenient location for the volume control
Compact 64x24x22mm. Includes brackets for custom mounting solutions

Output power: 110 watts RMS per channel @ 2 ohms, 230 watts RMS @ 4 ohms ( minimum impedance) bridged mono
Input sensitivity: 170 mV
Frequency Response: 5-200 Hz +/- 3 dB
Variable low pass: 50-200 Hz
Total harmonic distortion: 1% ( stereo ), 0.05%(mono)
Signal to noise ratio: 91 dB @ 100 Hz A-weight
Power requirements: 110-240 VAC
Max power consumption: 313W
Stand-by power rating: 0.5W
Auto turn-on sensitivity: 10 mV
Dimensions: 64x241x216mm

Description: -

    Dimensions:  64x241x216mm

Product Description

Dayton Audio high power low-pass amplifier is designed to power Dayton’s range of tactile transducers and works equally as well as a dedicated subwoofer speaker amplifier. The frequency (20-200Hz) and balance knobs let you dial in the desired crossover point and output. Convenient wired remote volume & power control. Rated at 110Wrms per channel 2 ohm stable. In bridged mono mode, both amplifier channels are combined for high-power 230Wrms mono. Manual and automatic on/off modes allow easy integration into automated systems and saves power when not in use. 5V USB power output is designed for use with the Dayton Audio Wave-Link wireless system (sold separately, see WLS). Gold plated 4mm or bare wire speaker binding terminals. Compact 60x240x210mm. Includes brackets for vertical or horizontal mounting.

Powerful 200 watt amplifier optimised for bass shaker installations
Robust 2 ohm minimum impedance provides maximum output to bass shakers
RCA line in and out for daisy chaining multiple units
Adjustable 50-200 Hz low pass crossover for seamless audio integration
Built-in USB port for powering 5V devices or for use with the wireless Dayton Audio Wave-Link receiver (Optional, see WLS)
Included wired remote provides a convenient location for the volume control
Compact 64x24x22mm. Includes brackets for custom mounting solutions

Output power: 110 watts RMS per channel @ 2 ohms, 230 watts RMS @ 4 ohms ( minimum impedance) bridged mono
Input sensitivity: 170 mV
Frequency Response: 5-200 Hz +/- 3 dB
Variable low pass: 50-200 Hz
Total harmonic distortion: 1% ( stereo ), 0.05%(mono)
Signal to noise ratio: 91 dB @ 100 Hz A-weight
Power requirements: 110-240 VAC
Max power consumption: 313W
Stand-by power rating: 0.5W
Auto turn-on sensitivity: 10 mV
Dimensions: 64x241x216mm

Description: -

    Dimensions:  64x241x216mm