SMD 1% Metal Film Resistor. Pack of 10FeaturesHigh grade thick film metal glazed ceramic bodySuitable for reflow or hand solderingTemperature range -55° to +125°CTemperature co-efficient ±100 ppm/°CTolerance ±1%0.25W ratedSMD Resistor Value Markings:0603 seriesOur range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above.0805 & 1206 seriesIdentified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

0.25W Metal Film Resistor 1% Tolerance. 50ppm temperature coefficient. Pack of 10Dimensions:L: 6.5mmD: 2.3mmd: 0.56mmH: 27mmManufacturers Please Note:Any part numbers beginning with a 7 need to be replaced with a 0 when ordering bulk packs. For example: R 7010 is the part number for a 1. 0.25W Carbon Film resistor in packs of 10. For the same resistor in a bulk pack of 1000, the part number will be R 0010.

All computer selected values, i.e. you get more of the most used values and less of the least common.

Contain 50pcs each of 72 of the most popular values (E12 series) from 2.4Ω to 10MΩ. 5% tolerance. Approx 3600 pieces.