This 2 Zone Bluetooth Audio Extension Wall Plate Receiver allows you to stream audio wirelessly from your devices in one room whilst your audio equipment/amplifier is located in another. Each plate connects to standard UTP cabling to relay audio signals back to the amplifier through the wallplate receiver without loss of quality. It also allows for two wallplates to be connected for two independent audio signals. Power for the wallplates is provided over the UTP cabling (max range 100m).Connection Diagram

Supplied as a pair, these handy bi-directional extenders allow you to send stereo audio signals over long distances using economical UTP cable (Cat5/5e/6). Ideal for connecting an audio source to an amplifier in another room. Maximum distance 75m.

This 5Ghz Wireless HDMI Extension System is easily the best wireless HDMI sender we’ve ever evaluated! We’ve tried many different units over the years, but this one has shown to have the best range and reliability. Uncompressed full HD (1080p @ 60Hz) HDMI signals, plus 7.1ch audio can be transmitted up to 100m line of sight (however walls/ceiling slabs may reduce range). In-built IR repeater enables control of the source device from the other room e.g.: change channels, adjust volume etc. Includes transmitter, receiver, power supplies and infra-red emitter. Size: 130W x 100D x 25Hmm.FeaturesSimple plug and play with no software installationHDMI loop output1080p @ 60HzSupports point to point or multi-cast to 4 receiversSupports uncompressed LPCM48Khz audioIncludes IR target & emitterUp to 100m rangeHDCP 1.3

Connects to a single HDMI source and transmits to a HDMI television in another room. Uncompressed full HD (1080p @ 30fps) HDMI signals, plus 7.1ch audio can be transmitted up to 35m line of sight (however walls/ceiling slabs may reduce range). In-built IR repeater enables control of the source device from the other room eg: change channels, adjust volume etc. Includes transmitter, receiver, power supplies and infra-red emitter.Features5GHz wi-fi transmissionUp to 35m line of sight transmission1080p @ 30fps max4dBi omnidirectional antennasStereo or 7.1ch surround soundInfra-red repeaterOptional loop through output on transmitter

Add bluetooth wireless audio streaming to headphones, speakers or even vehicles. Plug in the 3.5mm jack socket to jack socket adapter for speaker and vehicle usage. Provides buttons for adjusting volume & tracks. Bluetooth 4.1 provides CD quality sound output with low latency to ensure audio is in sync with video (if used).Can be charged whilst in useFeaturesEasy to OperateWireless controlPortable DesignSupports iPhone, Android phone, other smart phones which with Bluetooth A2DP functionCompatible with home stereos / speaker, car stereos, headphones that is with 3.5mm audio inputApplications:Convert wired headphones to wireless.Add Bluetooth streaming to existing active speaker system.Add Bluetooth audio from your phone to your vehicles sound system via 3.5mm aux input socket.Add Bluetooth streaming to any existing audio amplifier.

This handy little device allows you to stream audio via bluetooth and outputs a line level signal (3.5mm stereo) suitable for a pair of active speakers or connection to an amplifier. It also includes a USB output for charging. Includes 3.5mm to 3.5mm stereo jack lead for connection to amp or active speakers. If connecting to a stereo RCA input, use a P 6020A (1.5m)/ 20m range. It also supports aptX low latency for seamless lip sync between audio and video signals.FeaturesCD- quality Bluetooth 4.0 receiver with aptX.Supports the latest apt-X Audio Codec (AAC-LC, Mp3, SBC decoder also supported.Convenient USB charging port to charge mobile devices (up to 1 Amp – will not charge Apple iPhone devices)No batteries required – plugs directly into AC outletAudio connection cables includedBluetooth connection has a 10m range for wireless listening in your homeWide device compatibility – Authentic CSR chipset enable the device’s compatibility.